Assigning the Toggle
switches
The toggle switches act a bit different they are DX but
need some extra work to get them going. Because the
middle position of the switch is an off position, it needs
some tweaking in the key file. In the Docs folder in your
BMS install there is manual that describes the key files
and how it works I recommend to read chapter 6.1. It’s
located in Falcon BMS /Docs/Key Files & Input BMS Key
File Manual.PDF.
In windows DX is zero based which means numeration
starts at 0, DX in BMS numeration starts as 1. The range
where the ICP starts depends how many DX devices
you connected to your computer, so it may differ from
the example I describe but the actions are the same
regardless.
I have created some lines that have to be copied in
your Call sign keyfile.cfg , these lines have to be
adapted to your DX listing.
Summary of Contents for ICP V1.7
Page 12: ......
