TC-9 Viper ™ Gate System
Residential Sliding Gate Operator
Safety Alert Symbols
Start here and read these important safety rules for the TC-9 Viper Gate Opener
These safety alert symbols mean
CAUTION
– Personal safety, property damage
or danger from electrical shock. Read these instructions carefully
.
Failure to comply with the following instructions may result in serious injury,
including death or property damage. The TC-9 Viper Gate Opener is designed
and tested to provide reasonably safe service if properly installed and operating
in accordance the instructions provided in this Installation Manual
Electrical
Hazard
Installation and wiring must be in compliance with your local building and
electrical safety codes. Connect the power to the TC-9 Gate opener from a
properly grounded electrical outlet. If using electrical conduit to provide
power, be sure to attach the ground conductor to the TC-9 Frame and the
ground terminal on the circuit board.
Caution
Activate the opener only when the gate is in full view and free of
obstructions.
Do not allow children to operate the gate opener using any remote
transmitter or push button switch operators. Serious injury from closing
the gate may result from misuse of the opener.
Caution
Do not allow children to play near the gate opener. No one should enter or
leave through the gate while it is opening or closing.
Fasten the CAUTION LABEL near the TC-9 Gate Opener and push button
switch operators as a reminder of safe operating procedures.
Caution
Do not wear loose clothing, watches or rings while installing or servicing
the gate opener.
Keep your hands away from the gear box, chain and gate track rollers
during operation.
Do not use force to make adjustments or compensate for binding or
sticking gate operation.
Electrical
Hazard
Disconnect all electrical power before making repairs or removing the
cover on the TC-9 Opener
4