TC-9 Viper ™ Gate System
Residential Sliding Gate Operator
Description of your TC-9 Viper Gate Opener
FEATURES
Weather proof casing
Reliable magnetic limit switches for accurate open and close gate positions.
Self-locking gear motor in both open and close positions.
Two channel 300 mhz receiver.
Auto-close (12.5,25, and 45 second delay)
2 year limited warranty on motor
1 year limited warranty on manual & electric parts
SAFETY
Electric Safety monitor will stop and reverse gate to open position if it senses an
obstruction while gate is closing.
Release-key to open gate manually in case of an emergency (ie: power failure, fire, etc.).
Electronic anti-entrapment system, operable in both the open and closing directions.
Enclosed chain cover for added protection.
SPECIFICATIONS
Table 1, Viper TC-9 Specification
Motor
Safety
Type
Permanent split
capacitor,
Personal
Push button remote,
auto reversal
Speed
1470 RPM
Electronic
Independent up/down
force adjustment
Volts
120 VAC ± 10% 60 Hz
Electrical
Motor overload
protection
Current
Less than 6 Amps
Start Circuit
24 V push button or
remote sensor.
Operating Temp.
-22/158 F (-30/70 C)
Emergency
Clutch release Key
Torque
15 N.m maximum
Drive Mechanism
Dimension
Gears
1:30 Ratio
Length (overall)
N/A
Drive
Chain gear type
Ship Weight
58 lbs.
Length of Travel
35 ft max. by magnetic
Limit Switch
Chain Length
20 ft. (supplied), ANSI
chain No. 41
Travel Rate
1 ft per second.
Gate Size
35 ft. (Maximum)
Gate Weight (max.)
1200 lbs. (Maximum)
5
