background image

41

©   2 0 0 6   d i r e c t e d   e l e c t r o n i c s

Full trigger response 3

30

0  or 60 seconds: This determines how

long the full triggered sequence lasts. Some states have laws

regulating how long a security system can sound before it is

considered a nuisance. If your installer is programming the

security system with the Directed Bitwriter, the full triggered

response can be programmed for any duration ranging from

1 to 180 seconds.

Nuisance Prevention

®

Circuitry oon

n or off: Please refer to the

NPC

®

section of this manual for a complete explanation of

how NPC

®

operates. If NPC

®

is programmed off, the securi-

ty system will respond to inputs from any sensor indefinitely.

Progressive door trigger oon

n or off: When the system is armed

and a door is opened, the system responds with ten chirps

prior to beginning the full triggered sequence. If an instant

trigger is desired, the progressive door trigger can be pro-

grammed off.

Valet

®

pulse count: The number of presses of the Valet

®

button required to disarm the security system, AED, or the

VRS

®

system can be programmed from one to five presses. The

default setting is oon

nee press.

Siren tones and chirp volume: The output of the Revenger

®

note:

Because many states have laws regulating security

systems, programming NPC

®

off may cause your system

to violate state laws.

note: 

This feature will only function if the Failsafe®

Starter Kill relay has been installed.

Summary of Contents for Model 3002






















































Reviews: