38
© 2016 Directed. All rights reserved.
1. With the engine running,
set
the parking brake and
release
the
foot brake.
2.
Press
the
button, the parking lights will turn on and the
REMOTE START ON
message will play on the remote control.
3.
Turn
the key to off, and
remove
it from the ignition, the engine
continues running for the programmed runtime.
4.
Exit
the vehicle and
arm
the alarm.
Note
For Pit Stop Mode on manual transmission vehicles follow
the directions in the
MTS Mode
(
Manual Transmission Start
)
section with the door open.
MTS Mode (Manual Transmission Start)
When installed into a manual transmission vehicle, the system requires
that the MTS Mode is properly set when parking. If MTS Mode is not
properly set or is defeated after being properly set, the system will not
start the engine and the
REMOTE START ERROR
text and tones play as
an alert.
1. With the engine running,
place
gear shifter in neutral position,
press
the foot brake, then
set
the parking brake and leave the
engine running. For Pit Stop Mode (to leave the engine running
after arming),
open
the driver door..
2.
Release
the foot brake. As long as the engine is running there is
no time limit to perform this step.
3. Within 20 seconds of foot brake release,
press
any command
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode,
press
the optional dash mounted activation button
or send the Timer Mode command).
4. The parking lights flash five times to confirm MTS Mode en-
able and the remote start activates the ignition outputs. The
Summary of Contents for 5706V
Page 1: ...M O D E L 5706V O W N E R S G U I D E NO ONE DARES COME CLOSE...
Page 2: ......
Page 68: ......
