Chapter 3 PC 288 - CPU
Manual VIPA System 200V
3-18
HB97E - PC - Rev. 06/29
This sub-menu is used to define the board-specific settings. You may
navigate through the menu by means of the cursor keys.
+------------------------------------------------------------------------------+
| System BIOS Setup - VIPA Configuration |
| (C) 1999 General Software, Inc. All rights reserved |
+---------------------------------------+--------------------------------------+
| VGA Frame Buffer Size : 1.0 Mb |VGA Palette Snoop : Enabled |
| Graphic Clock Speed : 85 MHz |Watchdog : Enabled |
| Drive C : CF |Com1 Mode : RS232 |
| L1 Cache : Enabled | |
| | |
| | |
| | |
| | |
| | |
| | |
| Bios Version: 1.0.0 | |
| Seriennummer: 040002 | |
| Ausgabestand: 1 | |
| FPGA Version: 10 | |
| | |
| | |
+---------------------------------------+--------------------------------------+
| U/D/L/R/<CR>/<Tab> to select |
| or <PgUp>/<PgDn>/+/+ to modify |
+------------------------------------------------------------------------------+
This parameter determines the amount of memory that is used as graphic
memory for the internal graphic controller.
The respective memory area is no longer available as main memory for the
processor.
This option determines the clock speed used for the internal graphic
controller. This option should always be set to "85MHz".
This parameters determines the drive from which the operating system is
booted:
"CF" CompactFlash
(C:) followed by the internal drive (D:)
"DOC" DiskOnChip
- internal drive (C:) followed by CompactFlash
(D:)
In every case the other drive will be accessible as drive D:.
This option enables and disables the L1 cache of the processor.
This menu item determines whether access to the VGA palette can only
occur within the STPC (disabled) or whether it should also be routed to the
external PCI bus (enabled).
VIPA
Configuration
VGA Frame
Buffer Size
Graphic Clock
Speed
Drive C
L1 Cache
VGA Palette
Snoop
Summary of Contents for System 200V PC 288
