VIPA System 200V PC 288, Manual

Page: 33 / 54

Manual VIPA System 200V Chapter 3 PC 288 - CPU
HB97E - PC - Rev. 06/29 3-5
Components
The PC 288 is equipped with 3 LEDs that are used as status indicators.
These 3 LEDs are on when the power supply is turned on.
The following table shows the purpose and the respective color of these
LEDs.
Name Color Description
PW Yellow Indicates that the PC has been turned on. The PC
and the backplane bus (V-Bus) are receiving
power.
RN Green Is on when the PC status is software RUN and
V-Bus communication is active.
This LED is not turned on when a V-Bus error
occurs.
BA Red Is turned on when the output commands have
been locked (BASP), i.e. the output modules are
not enabled.
The ON/OFF switch controls the power supplied to the circuitry of the PC
and to the backplane bus.
The PC is provided with an internal power unit. Power is connected by
means of two terminals located on the front of the unit. The ON/OFF switch
controls the power unit. In position OFF, power is removed from the
backplane bus and the circuitry of the PC.
The power supply requires DC 24V. The supply voltage is used to power
the circuitry of the PC as well as the various modules that are connected to
the PC via the backplane bus with max. 3.5A.
Note!
Verify that the polarity of the power connection is correct!
This socket can accommodate a type II CompactFlash

memory card. The
PC includes this card into the system as an additional drive.
The CompactFlash

adapter provides compatibility with the "large"
PCMCIA type II format to the memory. This means that you may exchange
data with any PC via the PCMCIA slot.
Note!
Never eject or insert the memory card when the PC is turned on!
LEDs
ON/OFF lever
Power supply
Socket for
CompactFlash