Manual VIPA System SLIO
Chapter 3 Deployment
HB300E - FM - RE_050-1BA10 - Rev. 10/30
3-17
The activation res. de-activation of the counter happens via an internal gate
(I gate). The I gate corresponds to the software gate (SW gate).
The
SW gate
is opened (activated) via your user application by an edge 0-1
of the bit SW_GATE_SET of the
control word
in the
output area
. The
software gate is closed (de-activated) by an edge 0-1 of the bit
SW_GATE_RESET. If the I gate was automatically closed at "counting
once", so this may only be opened with an edge 0-1 on SW_GATE_SET.
The following states influence the I gate:
SW gate
influences I gate
0 0
1
1
with edge 0-1
1
Gate function abort and interrupt
The parameterization defines if the gate interrupts or aborts the counter
process.
•
At
abort function
the counter starts counting with the
load value
after
gate restart.
load value
gate start
time
counter value
gate stopp
gate start
•
At
interrupt function
, the counter starts counting with the recent
counter
value
after gate restart.
load value
gate start
time
gate stopp
gate start
counter value
Gate function
Summary of Contents for SLIO System FM 050-1BA10
Page 1: ...VIPA System SLIO FM 050 1BA10 Manual HB300E_FM RE_050 1BA10 Rev 10 30 July 2010...
Page 4: ...Contents Manual VIPA System SLIO ii HB300E FM RE_050 1BA10 Rev 10 30...
Page 8: ...Safety information Manual VIPA System SLIO 4 HB300E FM RE_050 1BA10 Rev 10 30...
Page 56: ...Chapter 3 Deployment Manual VIPA System SLIO 3 24 HB300E FM RE_050 1BA10 Rev 10 30...
