VIPA SLIO System FM 050-1BA10, Manual

Page: 35 / 56

Manual VIPA System SLIO
Chapter 3 Deployment
HB300E - FM - RE_050-1BA10 - Rev. 10/30 3-3
Bit Name Function
0 STS_SYNC Reset was active
1 STS_CTRL_COMP is set when
comparison bit
is enabled
2 STS_SW-GATE Status software gate
(set when
SW gate
is active)
3 STS_RST Status reset input
4 - reserved
5 STS_GATE Status internal gate
(set when internal gate active)
6 STS_COMP Status
comparison bit
7 STS_C_DN Status set at counter direction backward
8 STS_C_UP Status set at counter direction forward
9 STS_CMP* Status comparison is set when the
comparison condition is met. If comparison
is parameterized
never
, the bit is never set
10 STS_END* Status is set when
end value
was reached
11 STS_OFLW* Status is set at overflow
12 STS_UFLW* Status is set at underflow
13 STS_ZP* Status is set at zero run
14 ... 15 - reserved
*
The bits remain set until reset with RES_SET (bit 6
control word
).
Bit Name Function
0 CTRL_SYNC_SET activates the reset mode
1 CTRL_COMP_SET enables the
comparison bit
2 SW_GATE_SET sets the software gate
3 - reserved
4 - reserved
5 COUNTERVAL_SET sets counter temporarily to the value of
set
value
6 RES_SET resets the bits STS_CMP, STS_END,
STS_OFLW, STS_UFLW and STS_ZP
with
edge 0-1
7 - reserved
8 CTRL_SYNC_RESET deactivates the reset mode
9 CTRL_COMP_RESET disables the
comparison bit
10 SW_GATE_RESET resets the software gate
11 ... 15 - reserved
CSTS_I
Counter status
CCTRL_I
Control word