VIPA SLIO FM 050-1BB00, Manual, Page: 35 / 56

Manual VIPA System SLIO
Chapter 3 Deployment
HB300E - FM - RE_050-1BB00 - Rev. 10/30 3-3
Bit Name Function
0 - reserved
1 CTRL_COMP_SET enables the
comparison bit
2 SW_GATE_SET sets the software gate
3 ... 4 - reserved
5 COUNTERVAL_SET sets counter temporarily to the value of
set
value
6 RES_SET resets the bits STS_CMP, STS_END,
STS_OFLW, STS_UFLW and STS_ZP
with
edge 0-1
7 ... 8 - reserved
9 CTRL_COMP_RESET disables the
comparison bit
10 SW_GATE_RESET resets the software gate
11 ... 15 - reserved
DS = Data set for access via CPU, Profibus and ProfiNET
IX = Index for access via CANopen
SX = Subindex for access via EtherCAT
Name Bytes Function Default DS IX SX
DIAG_EN 1 Diagnostic interrupt * 00h 00h 3100h 01h
CH0A 1 C0: Input frequency track A 02h 01h 3101h 02h
CH1B 1 C0: Input frequency track B 02h 01h 3102h 03h
CH2A 1 C1: Input frequency track A 02h 01h 3103h 04h
CH3B 1 C1: Input frequency track B 02h 01h 3104h 05h
INT_I 1 C0: Interrupt behavior* 00h 80h 3105h 06h
FCT_I 1 C0: Counter function* 00h 80h 3106h 07h
MODE2_I 1 C0: Counter mode 2* 00h 80h 3107h 08h
MODE3_I 1 C0: Counter mode 3* 00h 80h 3108h 09h
SET_I 4 C0: Set value 00h 81h 3109h...310Ch 0Ah
END_I 4 C0: End value 00h 81h 310Dh...3110h 0Bh
LOAD_I 4 C0: Load value 00h 81h 3111h...3114h 0Ch
HYST_I 1 C0: Hysteresis 00h 81h 3115h 0Dh
CRES 1 reserved 00h 81h 3116h 0Eh
INT_II 1 C1: Interrupt behavior* 00h 82h 3117h 0Fh
FCT_II 1 C1: Counter function* 00h 82h 3118h 10h
MODE2_II 1 C1: Counter mode 2* 00h 82h 3119h 11h
MODE3_II 1 C1: Counter mode 3* 00h 82h 311Ah 12h
SET_II 4 C1: Set value 00h 83h 311Bh...311Eh 13h
END_II 4 C1: End value 00h 83h 311Fh...3112h 14h
LOAD_II 4 C1: Load value 00h 83h 3113h...3116h 15h
HYST_II 1 C1: Hysteresis 00h 83h 3117h 16h
CRES 1
reserved
00h 83h 3118h 17h
* This parameter may only be transferred at STOP state.
CTRL_I
CTRL_II
Control word
Parameter data