VIPA PC-CPU 486, Manual, Page: 23 / 64

Manual VIPA PC-CPU 486 Chapter 2 Hardware description
HB111E- Rev. 02/32 2-9
Deployment of the storage mediums
The PC has an included hard disk on basis of Flash-ROM with a size of
8MB DiskOnChip

and a CompactFlash

-Slot Type II.
Via a CompactFlash

adapter the CompactFlash

card gets compatible to
the "big" PCMCIA Type II format. This enables the data exchange with PCs
with PCMCIA slot.
The assignment of the hard disks takes place via the BIOS-SETUP
program.
Here you have different possibilities to control the boot behavior of the PC.
Every CompactFlash

storage module has an eject edge [1]. Turn the
module so that the eject edge shows to the right.
Push the storage module into the PC without too much pressure until it
clicks and the eject lever [2] appears.
To remove the CompactFlash

card push the eject lever.
PC 288
C
O
M
1
ON
PW
RN
BA
M
E
M
O
R
Y
[1]
PC 288
C
O
M
1
ON
PW
RN
BA
M
E
M
O
R
Y M
E
M
O
R
Y
[2]
Note!
The CompactFlash
â
storage module may only be inserted or removed
when shut down!
You have to set the storage module in the BIOS setup!
M
E
For protecting from unwanted ejects of the CompactFlash
â
card you may fold the eject lever into the upper side of the
case.
For a wanted eject you either fold the eject lever back or you
operate it with a screwdriver.
Outline
CompactFlash
   
insert/eject
Unwanted eject
protection