15
1. Ensure the Ethernet cable is connected between the camera and the wireless bridge (station), as per section 2.6.
2. Mount the other side of the wireless bridge (access point) on the building, facing towards the station on the solar
panel.
3. The access point can be powered by connecting the AP’s network port to the included PoE injector, then connect
the injector to a network switch and power supply.
4. (Optional) Connect the network switch to an NVR (The camera includes a microSD card for edge recording).
5. (Optional) Connect the network switch to a router, to be able to remotely access the NVR.
This section covers how to set up the Access Point side of WiFi network for your WiFi Solar Surveillance Kit.
Note:
The
station side of the wireless bridge should already be mounted under the solar panel.
3. Wi-Fi (Applies to SLR-B120/180-4W Only)
3.1 Connect using WiFi
NVR
(optional)
Router
Internet
Network Switch
Ethernet
Power
WiFi
Wireless Bridge
(Station)
Wireless Bridge
(AP)
24V PoE
Injector
DO NOT USE
48V Injector
240VAC
Power