8
Section 5: Shading Plate Installation
1. With the stand fully assembled, place the monitor on a flat, level desktop or table.
Then take out the shading plates to get ready for installing.
Left Side Shading
Plate x 1
Right Side Shading
Plate x 1
Top Right Shading
Plate x 1
Top Middle Shading
Plate x 1
Top Left Shading
Plate x 1
2. Follow the arrows to align the top-right and top-left shading plates with the ‘O‘ /
‘C‘ lines on both sides of the top-middle shading plates. Then insert top-right and
top-left shading plates into the top-middle shading plate. Keep sliding the top-
right and top-left shading plates until they fix in place.
Top Right Shading
Plate x 1
Top Middle Shading
Plate x 1
Top Left Shading
Plate x 1
3. Take out six NO.3 screws and follow the picture below to install the shading plates
onto the monitor. Release the screws if you want to remove the shading plates,
then cover the screw holes with the silicone pad.
Left Side Shading Plate
NO.3 Screws
Right Side Shading Plate
Top Shading Plate
