7
Section 4: Stand Installation
Keep the foam underneath the monitor before attaching the stand.
1. Open the package and take out the monitor with foam still attached. Gently place
it on a desktop or table.
2. Take out the stem and base. Insert the stem into the base then use the included
screwdriver and two NO.1 screws to fasten base to the stem.
NO.1 Screw x 2
Stand Stem
Base
3. Remove the foam covering the back of the monitor. Then align the stand stem’s
bracket with the opening on the back of the monitor. Carefully insert the bracket
into the opening. Use four NO. 2 screws to fasten bracket onto the monitor.
NO.2 Screw x 4
4. With the stand fully assembled, reattach it onto the back of monitor. Then remove
the remaining foam on monitor and stand it up on a flat, level desktop or table.
Make sure the monitor is laid on a flat surface before removing the stand.
