Operator’s Manual Page 89 of 89
OXY-2-USM-1, REV K
Abnormal Shutdown Screen
Sampling has been interrupted. A
failure caused the system to reboot.
Performance may be unreliable, and
maintenance may be necessary. Please
consult the Operator’s manual for
additional information.
A failure (General Protection
Fault, operating system hangup,
or application software hangup)
caused the system to reboot.
Upon reboot by watchdog, the
system should sound an audible
alarm and display this visual
alarm to notify that sampling has
been interrupted.
Reboot screen
(Figure 34)
Tap the
Okay
button, if sampling and
recording was previously being performed the
operator will be given the option (Figure 36) to
save or discard the previous (pre-failure)
logged data. The operator can also select
Continue Logging
to continue logging once
the device restores its pre-failure mode.
Data Screen
Invalid new date. Please enter correct
day value.
From
Set Up Date
screen: If an
incorrect or nonexistent day is
selected (for example, 6/31/2003)
and
Done
is tapped, this message
will occur.
Set Up Date
screen
Enter the correct day, and tap the
Done
button.
—End of T.Ox™ Tissue Oximeter Operator’s Manual.—
Summary of Contents for T.Ox OXY-2-USM-1
