VIOMI V3 Max, User Manual

Page: 15 / 22

13
The vacuum-mop has a feature of resuming cleanup. If the
vacuum-mop starts running low battery during a cleaning task, it will
automatically return to the charging dock to recharge. Once the
vacuum-mop is fully charged, it will resume cleanup where it left off.
If the cleaning task is manually ended while the vacuum-mop is
charging, cleanup will not be resumed.
Resuming Cleanup
You can set a specified area on the map via the app, then the
vacuum-mop will automatically navigate to the area and clean a
square-shaped area of 2 × 2 meters.
Clean There
You can schedule cleaning times in the app. The vacuum-mop will
automatically start cleaning at the scheduled times, then return to
the charging dock after the cleaning is completed.
Note: The vacuum-mop will not do the scheduled cleanup during the
Do Not Disturb period if Do Not Disturb mode is enabled.
Scheduled Cleanup
You can set up virtual walls and restricted areas in the app to prevent
the vacuum-mop from entering areas you wish not to clean.
Virtual Walls/Restricted Areas
You can use the app to enable smart mapping. This allows the
vacuum-mop to automatically update its map after completing a
cleaning task and recharging.
Smart Mapping