INS
TALL
ATION
© Copyright 2021 Violet Defense, LLC All Rights Reserved
VNTG-USRMNL-2021
14
INSTALLATION - HARD-CEILING
VANTAGE I WITH ADAPTER PLATE
Installing Mounting Plate
1. Identify mounting location for unit. Use the mounting
plate (Figure 1) as a template to mark the cut-out area
where you’ll install your unit (area shown in purple).
2. Use a drywall saw to cut along the lines of the stencil
you drew. Then, drill the anchor holes from the
template.
3. Thread all four dry wall anchors through the mounting
plate.
4. Put the mounting plate into the ceiling, ensuring the
anchors match up to the holes.
5. Tighten the toggle bolt anchors.
Assembling Hard Ceiling Kit
6. Place the Vantage unit face down making sure that
the light engine and occupancy sensor fits within the
Vantage front plate cutout.
7. Attach the Vantage front plate to the Vantage unit
by securing with brackets and hardware as shown in
Figure 2.
8. Plug the unit into a standard 110V grounded outlet.
9. Insert the assembled kit into the mounting plate and
secure with hardware as shown in figure 3.
Figure 1
2
Vantage Front Plate
Vantage Unit
Bracket (x2)
#8-32 Nut (x4)
Lock Washer #8 (x4)
Washer, Flat Plain #8 (x4)
Figure 2
Figure 3
1
3
2
Phillips Head Pan #6-32 x 5/16 (x4)
Lock Washer #6 (x4)
Washer, Flat Plain #6 (x4)
Completed Assembly
