TROUBLESHOOTING
1.
If unit is flashing red, then an issue was detected by the unit. Unplug or power down the unit.
2. Plug the unit back into the wall or turn on power to unit. Exit the space within 60 seconds.
3. When you return to the space, identify the color of light on the sensor indicator. If unit is green or
solid red, the unit is working properly. If unit is still flashing red, contact customer service at Violet
Defense at 407-433-1104.
4. If unit is non-responsive (i.e. no indicator light showing), please contact Violet Defense for
technical support at 407-433-1104 or
. There are no user serviceable
components. Serving should be performed by qualified service personnel. Hazardous voltages may
be present.
Each Vantage UV unit has indicator lights that
help you determine the status of the unit.
CLEANING THE UNIT
• Do not use abrasive cleaners to clean the unit.
•
To clean the unit, wipe down the metal plates with stainless steel polish using a microfiber cloth.
TR
OUBLE
SHOO
TING
© Copyright 2021 Violet Defense, LLC All Rights Reserved
VNTG-USRMNL-2021
12
Color of Light
Meaning
Flashing Green
Unit is ready to begin cleaning when room becomes
unoccupied.
Solid Green
Unit has successfully completed its cleaning cycle. If
unit detects motion, the unit will change to solid red,
even if cycle completed.
Solid Red
Unit was interrupted during the cleaning cycle.
Cleaning will resume when room becomes unoccupied
again during the programmed times for operation.
Flashing Red
One of the safety sensors has detected an issue.
Please see troubleshooting section for further
information.
