POV.HD User Manual
Get Ready
4
Get Ready
The POV.HD is shipped with everything you need to start making great videos in HD, but a bit of assembly is
required before you get started.
Watch the video tutorials
The POV.HD comes preloaded with video tutorials that demonstrate all the most important aspects of setting
up and using your POV.HD.
a.
To view the tutorials on a computer you can upload them from the SDHC card included with the
POV.HD, or you can access them directly from the V.I.O., Inc. website at
www.vio-‐inc.com/tutorials
.
b.
To view the tutorials on your POV.HD recorder, set up the recorder as shown in the next step, below,
then play the tutorials, as shown in
Previewing Video on the Recorder
.
Set up the POV.HD recorder
1.
Install the 4 AA batteries included with the POV.HD in the recorder.
•
Turn the recorder over and unlatch the two battery cover clamps.
•
Remove the cover and install the batteries.
Because of the seal, the hatch may stick slightly. This is normal. Excessive force is not required.
Check to see that the clamps are unlatched if it feels too tight.
•
Replace the cover, and snap the latches back into place.
The tutorials are the only files on the SDHC card when you receive it. The tutorials
follow the standard POV.HD video file name convention which doesn’t tell you
which is which, but as you preview the tutorial videos, the LCD on the recorder will
display the name of each tutorial.
