21
Adjustments
Pan brake knob adjustment
Because its movement is restricted, the pan brake knob
may require adjustment after pro-
longed use.
To adjust the pan brake knob
:
and pull the knob
off the shaft
.
Turn the shaft
clockwise until the pan brake is fully applied.
Install the knob
positioned just beyond right angles (clockwise) to
the body of the head.
Turn the knob fully counterclockwise and ensure the brake is released. Turn the knob clock-
wise and ensure the brake is applied before the knob reaches the end of its travel.
Readjust as necessary and secure the knob with the screw
.
Tilt brake knob adjustment
The tilt drag knob
may also require adjustment after prolonged use:
To adjust the tilt brake knob
:
and pull the knob
Turn the shaft
clockwise until the pan brake is fully applied.
Install the knob
with the lever approximately horizontal in a 3 o’clock
position, pointing toward the rear of the head.
Turn the knob counterclockwise by half a turn and ensure the brake is released. Turn the
knob clockwise and ensure the brake is applied before the knob reaches the end of its travel
or interferes with other head controls.
Readjust as necessary and secure the knob with the screw
.
Summary of Contents for PRO-5Plus
