16
Check the camera balance as follows, ensuring that the pan bar(s)
and any ancillary equip-
ment have been fitted:
to minimum level.
Release the tilt brake
Using the pan bar
, tilt the head backwards and forwards to determine if the camera po-
sition is equally balanced in both directions. If not, set the platform level and apply the tilt
brake
. Position the camera correctly on the head by releasing the slide plate clamp
Fig. 5 Balance selector
NOTE:
When changed, the selected balance level
engages as the platform moves
through the horizontal position.
WARNING!
Steady the camera payload using the pan bar. Be prepared to prevent the
head falling away suddenly. Keep hands clear of the moving platform to
avoid trapping fingers.
(12)
Summary of Contents for PRO-5Plus
