22
‘Pozi-Loc’ tripod leg clamp adjustment
Bedding-in occurs with ‘Pozi-Loc’ leg clamps, which may necessitate resetting the clamp. Check
the effectiveness of each leg clamp and adjust as follows
Turn the clamp knob
to the vertical, ‘off’ position.
Remove screw
. Using a suitable peg spanner, back off the threaded insert
slot
by slot until the leg is free to move under its own weight.
While sliding the leg in and out, gradually tighten the threaded insert
until the clamp
begins to grip.
If not aligned, back off the threaded insert
until a slot aligns with the hole for screw
.
a further three slots.
Install screw
.
Fig. 7 Pan and Tilt brake adjustments
(10.1)
(10)
(10.2)
(13.2)
(13)
(13.1)
Summary of Contents for PRO-5Plus
