9
Installation
Assembling the Pedestal
1.
Turn the skid upside-down, depress the leg locking plungers and swing each folding leg out until the plungers lock the legs in the fully open
position.
2.
Fit the kick bar (2), by pressing it into all three sliding catches on the underside of the centre casting (Step 1) and secure it by engaging all three
locks (Step 2). The weld line on the kick bar should be aligned with the handle on the skid.
3.
Set the skid on the ground on its wheels and apply the brakes (4).
4.
Ensure that the rubber straps on each foot support (3) are to the outside of the ball joint.
28
1.
2.
28
1.
2.
28
1.
2.
