V20SGEBK
8
User Manual
TYPES OF REGULATION
Please note that depending on the loading and settings chosen it takes 24hours for the wine
cellar to see the temperature stabilizing.
During this time LED seems to move erratically in particular for 2e models. It is a normal
process. This process occurs whenever the setting is modified and/or whenever a large
amount of bottles are added to the cellar.
TEMPERATURE SETTINGS
Important: The LCD displays by default the actual internal air temperature.
The temperature settings are pre-set at the factory at 12
º
C.
Note:
In the event of a power interruption, all previous temperature settings are
automatically erased and it will revert to a preset temperature setting of 12
º
C.
The setting values are not in degree Celsius but in index values. An index value is roughly
equivalent to 1
º
C
You will need to wait approximately 12 hours before noticing the effects of temperature
adjustment due to the critical mass within a full wine cellar.
Once the thermostat is set it is strongly advised not to toy with it or adjust frequently. The
thermostat will maintain the temperature inside the wine cellar within a +/- 2.5
º
C. The
thermal inertia of the wine and the glass is such that within this temperature range, the actual
temperature of the wine will only fluctuate 0.5
º
C to 1
º
C. It is important to understand that
there is a difference between the air temperature inside the wine cellar and the actual
temperature of the wine.
Control panel of your wine cellar
Adjust the desired cooling temperature by pressing the UP or DOWN buttons. Each
depression of the buttons will scroll through the available temperature settings in increments
of 1 degree Celsius. The temperature setting can be adjusted from 5
℃
to 18
℃
To visualize the
“
set
”
temperature, press and hold the UP or DOWN buttons, the
“
set
”
temperature will temporarily
“
flash
”
in the LED display for 5 seconds.
