V20SGEBK
6
User Manual
Back spacer:
Compressor-run appliances require proper ventilation for proper and longer usage. Your
Vintec wine cellar is supplied with a back spacer. Affixed the back spacer at the back of the
cellar for air circulation and heat evacuation.
IMPORTANT - THIS SPACER MUST BE ATTACHED TO THE UNIT BEFORE
INSTALLATION FOR VENTILATION PURPOSE. FAILURE TO DO SO VOIDS THE
WARRANTY
TURNING ON YOUR WINE CELLAR
Plug in and switch on the cellar by pressing on the power button for a few seconds.
When you use the wine cellar for the first time (or restart the wine cellar after having it
power off for a long time), there will be a few degrees variance between the temperature you
have selected and the one indicated on the LED readout. This is normal and it is due to the
length of the activation time. Once the wine cellar is running for a few hours everything will
stabilize.
Important: If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes before
restarting the unit. The wine cellar will not start if you attempt to restart before this time
delay.
