6
901271 REV G 02/04/19, 1969-70 MUSTANG wo AC EVAP INST PG 6 OF 26
BATTERY (RETAIN).
DRAIN RADIATOR
OEM HEATER HOSES (DISCARD).
ENGINE COMPARTMENT
REMOVE THE FOLLOWING:
BEFORE STARTING THE INSTALLATION, CHECK THE FUNCTION
OF THE VEHICLE (HORN, LIGHTS, ETC.) FOR PROPER OPERATIONS.
STUDY THE INSTRUCTIONS, ILLUSTRATIONS & DIAGRAMS.
REFER TO SEPARATE INSTRUCTIONS INCLUDED WITH THE CONDENSER KIT TO INSTALL
THE CONDENSER.
BINARY SWITCH INSTALLATION (REFER TO CONDENSER INSTRUCTIONS)
REFER TO SEPARATE INSTRUCTIONS INCLUDED WITH THE BRACKET KIT TO INSTALL THE
COMPRESSOR BRACKET.
CONDENSER ASSEMBLY & INSTALLATION
COMPRESSOR & BRACKETS
NOTE:
REMOVAL OF THE DASHBOARD IS REQUIRED TO INSTALL THE EVAPORATOR. VINTAGE AIR
RECOMMENDS THAT YOU UTILIZE THE FACTORY SERVICE MANUAL WHEN YOU DISASSEMBLE
AND REASSEMBLE THE DASHBOARD.
REMOVE THE DASH PAD, INSTRUMENT PANEL, PASSENGER SIDE PANEL AND LOWER PASSENGER SIDE
DASHBOARD (RETAIN SCREWS) (SEE FIGURE 1, BELOW).
GLOVE BOX (DISCARD) (SEE FIGURE 1, BELOW).
NOTE: THE GLOVE BOX WILL NOT FIT WITH THE
EVAPORATOR UNIT INSTALLED. A WITH FACTORY AIR VEHICLE AFTERMARKET GLOVE BOX WILL
NEED TO BE PURCHARSED.
HEATER ASSEMBLY AND ALL RELATED DUCTING (DISCARD) (RETAIN SCREWS) (SEE FIGURE 2, BELOW).
CONTROL PANEL ASSEMBLY (RETAIN CONTROL PANEL) (SEE FIGURE 1, BELOW).
REFER TO THE CONTROL PANEL CONVERSION KIT INSTRUCTIONS FOR INSTALLATION OF THE CONTROLS.
REMOVE THE OEM DEFROST DUCT ASSEMBLY (SEE FIGURE 2, BELOW).
INSTRUMENT
PANEL
CONTROL
PANEL
DEFROST DUCT
ASSEMBLY
HEATER
ASSMEBLY
FIGURE 1
FIGURE 2
DASH PAD
GLOVE
BOX
PASSENGER SIDE
PANEL
LOWER PASSENGER
SIDE DASHBOARD
PASSENGER COMPARTMENT
REMOVE THE FOLLOWING:
