•
Hold the stopper-dispenser and press the latch at the coupling socket to
disconnect the coupling plugs.
•
Remove the bottle and stopper-dispenser from the rack.
•
Hold the stopper-dispenser and turn the thumbwheel counter-clockwise all the
way to loosen it from the bottle neck.
•
Get a new bottle and place the stopper-dispenser onto the bottle neck.
•
Hold down the stopper-dispenser and turn the thumbwheel clockwise to tighten
the bottle neck with your thumb and forefinger only.
•
Place the bottle in the rack and connect the wine coupling plug and socket at the
stopper-dispenser, then connect the gas coupling plug and socket.
•
When bubbles stop forming at the stopper-dispenser, the bottle seal is good.
Dispensing Wine
•
Press and hold the dispensing button to dispense
the selected wine into your glass.
•
Release the button to stop dispensing.
•
Keep glass under the spout until wine stops
dripping.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
23
Summary of Contents for VT-100 WINEDISP4
Page 30: ...W W W V I N O T E M P C O M 30...
