Vimar ELVOX TAB 40507 User Manual Download Page 56

Page: 56 / 110

TAB: 40507

Settings

From the Settings page you can customize various parameters to make the 7” EVO video entryphone more

familiar and easier to use.

Press the button

located on the left of the Top Bar in the Home page.

The settings are grouped by category.

General: general parameter settings such as name, date and time and date and time format.

Display: customization of the appearance with the desired background, selection and arrangement of

applications, management of favourite commands.

Sounds, ringtone settings and volumes.

Call options: video voicemail settings, management of automatic door opening (Professional Studio),

dictionary customization.

WiFi/Mobile Devices: network configuration and association of mobile devices for call forwarding.

System: system settings including setup, reset, various information.

To quit SETTINGS, press the green bar marked with an X on the left of the screen.

Summary of Contents for ELVOX TAB 40507















































































































Search results

Summary of Contents for ELVOX TAB 40507

Reviews:

Related manuals for ELVOX TAB 40507

Brands by name

Popular brands

Vimar ELVOX TAB 40507, User Manual

Search results

Summary of Contents for ELVOX TAB 40507

Reviews:

Related manuals for ELVOX TAB 40507

Brands by name

Popular brands