Vimar ELVOX TAB 40507 User Manual Download Page 36

Page: 36 / 110

TAB: 40507

Applications

Video voicemail

Gives access to the VOICEMAIL page, which displays a list of all the messages recorded from entry

panels or internal units (intercom calls).

The page presents the messages in chronological order, with the last message to be recorded at the top of the list.

Each call or videocall is identified by the name of the device from which the call was made, plus the date and

time at which the recording started.
If there any new messages that have not yet been listened to, the icon on the Home page changes colour to

alert the user.
How to listen to a video message:

- Select the video message (highlighted by a green bar). A preview of the recording is displayed in the box

on the right of the screen.

Starts playback of the recording in full-screen mode.

Available during playback, pauses playback of the message

Deletes the selected message.

Additional commands are available during playback of video voicemail messages,.

Summary of Contents for ELVOX TAB 40507















































































































Search results

Summary of Contents for ELVOX TAB 40507

Reviews:

Related manuals for ELVOX TAB 40507

Brands by name

Popular brands

Vimar ELVOX TAB 40507, User Manual

Search results

Summary of Contents for ELVOX TAB 40507

Reviews:

Related manuals for ELVOX TAB 40507

Brands by name

Popular brands