10
EAM2, EAM3
IT
5- Possible positions of the bracket:
N.B. If using hole F2 or F3, it is necessary to cut the bracket, see figure:
Before installing the automation, check that:
- the hinges are sturdy and efficient and there is no strong friction
- the measurement Y is no greater than the value shown in the table of installation dimensions. In this case it is necessary to work on the pillar in
order to reach this measurement
- the length of the gear motor power supply cables does not exceed 15 metres
- there are the mechanical stops which are properly secured
Installation dimensions:
A
E
Y
Z
B
C
L
S
H
X
W
6- Choice of the hole for securing the pivot for actuator rotation:
F1
F2
F3
Z1
Z2
Z3
F1
F2
F3
F1
F2
F3
