11
Due Fili Plus telephone interface
• Wait for the three confirmation tones otherwise if you hear a brief tone and a long tone this means that
programming has not been accepted.
At the end of the operations, proceed directly to a new programming or hang up the telephone.
PASSWORD TO ACCESS THE CONTROLS (888 84 C PPPP)
In STANDARD mode, 4 different passwords can be associated for each call button, allowing only those who know
them to use the M controls.
To define a password:
• Call the internal tap-off or the telephone number where the 40164 is connected on a telephone, wait for the call
tone and the subsequent brief tones (three repeated brief tones)
• Type in code
888
• Type in programming code
84
• Type in the index referred to the call button
C
(
from 1 to 4
) you want to configure.
• Type in the password consisting of 4 digits
PPPP
(# and * are not permitted)
• Wait for the three confirmation tones otherwise if you hear a brief tone and a long tone this means that
programming has not been accepted.
At the end of the operations, proceed directly to a new programming
Once you have defined the passwords, you can activate or deactivate their use for each single call button:
• C
all the internal tap-off or the telephone number where the 40164 is connected on a telephone, wait for the call
tone and the subsequent brief tones (three repeated brief tones)
• Type in code
888
• Type in programming code
78
• Type in code
1
(to activate)
0
(to deactivate)
• Type in the index referred to the call button
C
(
from 1 to 4
).
• Type in the confirmation code
5
• Wait for the three confirmation tones otherwise if you hear a brief tone and a long tone this means that
programming has not been accepted.
At the end of the operations, proceed directly to a new programming.
When the password is active, at the time of activating a control, you first need to type in the password followed by #
and then type in the code of the control followed by #.
5.13 Control groups
G
roups make it possible to activate several controls (M) simultaneously via a brief code.
The interface envisages up to 8 groups which can be associated with several controls.
Each control can be associated with several groups.
Associating a Group with a Control number
• Call the internal tap-off or the telephone number where the interface is connected on a telephone, wait for the
call tone and the subsequent brief tones (three repeated brief tones)
• Type in code
888
• Type in programming code
77
• Type in the number of the control
M
(
from 10 to 49
) you wish to configure
• Type in the confirmation code
8
• Type in the code of the group from
001
to
008
Associating a Control with a Group
• C
all the internal tap-off or the telephone number where the 40164 is connected on a telephone, wait for the call
tone and the subsequent brief tones (three repeated brief tones)
• Type in code
888
• Type in programming code
42
• Type in the index referred to the group
G
(
from 1 to 8, 0 = deletes the association of the control
) you wish
to configure
• Type in the two-digit control code
M
(from 10 to 49).
