Vimar BY-ME, User Manual

Page: 59 / 188

55 55
Burglar alarm system
• Press Zones On/Off to deactivate the single zones into which the system is subdivided.
This function is useful, for example, when you want to move about freely in a zone of the house
even if the partition to which it belongs is active or to be able to leave a window open even if is
included in a zone to be activated.
Attention : The zones will stay off until they are turned back on again with the same menu (so the
associated sensors will not protect the excluded zones).
If the system is activated while a sensor is detecting a movement or a contact (door/window) is
open, the activation is blocked and the control panel will display the device and the zone that pre-
vented carrying out the operation.
In the event of an alarm the control panel will display the device that caused it and the zone to which
it belongs (Fig. 18).
Fig. 18
Setup
Stop Alarm
Menu
S.A.I. 06:00
Alarms List
System off
On/Off zone
System
on
IR sensor
Day Zone