Vimar BY-ME, User Manual

Page: 42 / 188

38
Hvac
3. HVAC.
The HVAC menu is used to read off the control panel the temperature measured by the various ther-
mostats and to change the type of operation or the temperature setting of each single thermostat.
In addition, again with the control panel, it will be possible to operate each thermostat in a completely
similar way to that of a timer-thermostat (AUTO mode), setting the operating temperature and the
relevant time bands
.
3.1 Viewing the temperature of the thermostats in the different zones of the house.
Main menu

HVAC
(press button A on the control panel)
Zone 01 is displayed; with Zone  and Zone  buttons (buttons G and H ) you can view all the tem-
perature zones in the house one by one.
For each zone the display shows:
• the measured temperature;
• the state of the thermostat (On if it is working to take the temperature up to the setting, Off if the
temperature has been reached);
• the heating mode (Heating or Air-Conditioning );
• the type of operation (Manual, Automatic, Timed Manual, etc).
Then press the Menu button (button E) to return to the Main Menu.
Fig. 7
Menu Zone

Zone

Setup
Thermostat 01 14:58
Operation
Temperature
Thermostat 01
Zone 01
Temperature
Climate
Logout Setup
Main menu 15.01.2011 05:57
Scenes
Audio
Others
To call up
the Application
press
corresponding
Button