14
6.1.1 Standby
The colour and brightness of the LEDs is that set during configuration.
■
Lower left LED:
- Off if the DO NOT DISTURB signal is not active.
- On at set brightness for standby if the signalling is active.
■
Lower right LED:
- Off if the MAKE UP ROOM signal is not active.
- On at set brightness for standby if the signalling is active.
■
Outputs O1 and O2 follow the DO NOT DISTURB and MAKE UP ROOM signals respectively.
■
If a hand enters the proximity detection area, the device will be activated.
6.1.2 Activated
The colour and brightness of the LEDs is that set during configuration.
■
The upper left and upper right LEDs come on at full brightness.
■
Lower left LED:
- Off if the DO NOT DISTURB signal is not active.
- On at full brightness if the signalling is active.
■
Lower right LED:
- Off if the MAKE UP ROOM signal is not active.
- On at full brightness if the signalling is active.
■
Press the upper left push button to enable/disable the DO NOT DISTURB signal.
■
Press the upper right push button to enable/disable the MAKE UP ROOM signal.
■
Outputs O1 and O2 follow the DO NOT DISTURB and MAKE UP ROOM signals respectively.
■
10 s after the hand is withdrawn from the proximity area, the device returns to standby.
6.2 External room
In this case the device is installed outside the room and is used as a door bell and shows the “DO NOT DISTURB” and “MAKE UP ROOM” signals.
Only the following are used:
• 5 signalling LEDs (the 2 LEDs in the left-hand module, the lower central LED and the 2 LEDs in the right-hand module).
• 1 push button (lower centre).
• 1 output (O4).
• 4 inputs (I1, I2, I5 and I6).
Left module
Central module
Right module
Upper pushbutton
IN
Always off
OUT
Lower pushbutton
MAKE UP ROOM indicator
Door bell
DO NOT DISTURB indicator
The device is normally in standby condition.
6.2.1 Standby
The colour and brightness of the LEDs is that set during configuration.
■
upper left LED (IN = client in room):
- Off if input I1 is not active.
- On at set brightness for standby if I1 is active.
Operation
