16
4.4 Coding SLAVE keys
Use this procedure to code SLAVE keys, which will be recog-
nized only by the transponder readers that have coded them.
4.4.3
Bring the reader near to the key to be
coded as a SLAVE. The LED will blink 2
times to signal coding has completed and
then go back to green.
4.4.4
Repeat this step for the other SLAVE keys
to code; each time the LED will blink to
signal successful coding
4.4.5
The same key can be coded also on other
readers by repeating the previous step.
4.4.2
Press the button a number of times until
the LED lights up green.
4.4.1
The reader must be in configuration status
(the sequence of operations described in
Chapter 4.2 must have been carried out).
off
green
green
green
