Villeroy & Boch A5L Quick Reference Download Page 18

Page: 18 / 51

Unlocking

An Unlock Sequence using the navigation buttons can be used

from the Lock Screen. Th e Unlock Sequence is the same for both

Panel Lock and Settings Lock. You must enter and highlight

“Unlock” then enter and highlight panel “ON” before entering the

unlock sequence.

Additional Settings

Hold Mode

Th e “Hold” function prevents the jets from running to allow

JetPaks to be swapped out. By default, a hold lasts 60 minutes, or
until the Exit button is pressed

Utilities

Th e Utilities Menu contains the following:

A/B Temps

When this is set to On, the temperature display will alternate to
display temperature from Sensor A and Sensor B in the heater.

Fault Log

Th e Fault Log is a record of the

last 24 faults that can be reviewed
by a service tech.

RCD Test

Th is screen allows the RCD

to be tested manually from the

panel and can be used to reset the

automatic test feature. If the RCD Test Feature is reset, the device
will trip within 7 days. (See RCD Test Section)

Preferences

Th e Preferences Menu allows the

user to change certain parameters

based on personal preference.

Temp Display

Change the temperature between
Fahrenheit and Celsius.

Time Display

Change the clock between 12 hr and 24 hr display.

Reminders

Turn the reminder messages (like “Clean Filter”) On or Off .

Cleanup

Cleanup Cycle Duration is not always enabled, so it may not

appear. When it is available, set the length of time Pump 1 will
run after each use. 0-4 hours are available.

Color

Pressing the Select Button when Color is highlighted will cycle

through 5 background colors available in the control.

Language

Change the language displayed on the panel.

Information

Th e System Information Menu displays various settings and

identifi cation information that might be used by a service

technician. As each item in the menu is highlighted, the detail
for that item is displayed at the bottom of the screen.

Stereo Controls (Optional)

For Premium Series Spas with optional stereo systems

If your spa is equipped with an “Elite” Audio system, refer to its

separate manual for operating instructions. If your spa has a Life

Audio system, the spa’s A900 control pad will control various

functions of Bluetooth connected devices.

From the main screen, select “A/V” using the up or down arrow

buttons to the right of the screen. Select “A/V” by pressing the

center square button.

On the A/V screen use the up, down, left, or right arrow buttons

to highlight desired function., then press center square button to

select.

Th e fi rst time you use your Bluetooth device with a Life Audio

system you must fi rst “pair” your device to the spa audio system.

Each device must be paired separately.

Turn on your Bluetooth device and place within 20 feet (6

meters) of your spa. Th e device must have “line of sight”

to the spa control panel / equipment door area. (NOTE:

Certain house construction materials and other obstructions

can impact Bluetooth connectivity. You may need to

experiment with where to place your BT device for best

results.)

From the main spa screen, select “A/V” using the up or down

arrow buttons to the right of the screen. Select “A/V” by

pressing the button.

Additional Settings

Hold Mode

Hold Mode is used to disable the pumps during service functions like cleaning or replacing the fi lter. Hold Mode will last
for 1 hour unless the mode is exited manually. If spa service will require more than an hour, it may be best to simply shut
down power to the spa.

Utilities

The Utilities Menu contains the following:

A/B Temps

When this is set to On, the temperature display will alternate to display temperature from Sensor A and Sensor B in
the heater.

Fault Log

The Fault Log is a record of the last 24 faults that can be
reviewed by a service tech.

GFCI Test

This screen allows the GFCI to be tested manually from the panel
and can be used to reset the automatic test feature. If the GFCI
Test Feature is reset, the device will trip within 7 days. (See
Page 16)

Fault Log

Back

Entry 2

Message Code M026

1 Days Ago 2:21PM

Rest Mode

High Range

Set Temp 104°F

Sensors: A: 100 B: 96

Message:

Sensors are out of sync

Additional Settings

Preferences

The Preferences Menu allows the user to change certain parameters based
on personal preference.

Temp Display

Change the temperature between Fahrenheit and Celsius.

Time Display

Change the clock between 12 hr and 24 hr display.

Reminders

Turn the reminder messages (like “Clean Filter”) On or Off.

Cleanup

Cleanup Cycle Duration is not always enabled, so it may not appear. When it is available, set the length of time Pump
1 will run after each use. 0-4 hours are available.

Color

Pressing the Select Button when Color is highlighted will cycle through 5 background colors available in the control.

Language

Change the language displayed on the panel.

Preferences

Back

Temp Display

Time Display

Reminders

Cleanup

Color

Language