Villeroy & Boch A5L Quick Reference Download

Page: 17 / 51

hour, the System will revert to Rest Mode. Th is mode can also

be reset by entering the Settings Menu and changing the Heat

Mode.

Time Settings

Setting the time is important for fi ltration settings and other

background settings to function as expected. “Set Time” will

appear on the display if no time-of-day is set in the memory.

From the main menu, navigate to the Settings line by using the

and keys. Press to enter the Settings Menu. On the

Settings Screen, select the Time of Day line using the

and

keys. Press to enter the Time of Day menu. On the Time

of Day screen, simply navigate and right and left to select

the Hour, Minutes, AM/PM and 12/24 Hour segments. Use the

Up and Down Buttons to make changes.

When changes are made, the “Back” button will be replaced by a

“Save” button and a new icon for “Cancel” appears under the Save

icon. Press while the Save button is selected to confi rm your

selection.

Light Timer

Your spa is equipped with a timer that, when engaged, will

turn the interior and exterior lights on and off . To set the light

timer, from the main menu, use the

or buttons to select

“Settings,” press , to enter the Settings Menu. Press to

enter the menu list. Use the

and buttons to select “Light

Cycle”. Press to enter the menu. Press to enter the menu

list. Press

or to enable the Light Timer. Press to

select the hour, minute, and duration of the light cycle. When

changes are made, the “Back” button will be replaced by a “Save”

button and a new icon for “Cancel” appears under the Save

icon. Press while the Save button is selected to confi rm your

selection.

Saving Settings

Th roughout your use of the settings screen, save your settings by

following these steps:

When changes are made, the icon to go “Back” changes to

“Save” and a new icon for “Cancel” appears under the Save icon.

Navigating to the left will highlight the Save icon, and navigating

down from there will allow the user to cancel the pending change.

Pressing the “Select” button will save or cancel the changes and
go back to the previous screen.

Adjusting Filtration

NOTE:

Your spa’s factory default fi lter cycle start times are

8:00am and 6:00pm daily. When using the most economical “rest”

mode, it is recommended that you adjust the fi ltration cycles to
run just prior to the time of your usual spa use.

Filter Cycle 1

Using the same navigation and adjustment as Setting the Time,

Filter Cycles are set using a start time and a duration. Each

setting can be adjusted in 15-minute increments. Th e panel

calculates the end time and displays it automatically.

Filter Cycle 2

Simply navigate to the Filter Cycle 2 line by pressing the Right

Navigation button, and when “Yes” is highlighted, press Up or

Down to toggle Filter Cycle 2 on and off . When Filter Cycle 2

is ON, it can be adjusted in the same manner as Filter Cycle 1 by

navigating to the right. It is possible to overlap Filter Cycle 1 and

Filter Cycle 2, which will shorten overall fi ltration by the overlap

amount.

Purge Cycles

In order to maintain sanitary conditions, as well as protect against

freezing, secondary water devices will purge water from internal

spa components by running all pumps at the beginning of each

fi lter cycle. If Filter Cycle 1 is set for 24 hours, enabling Filter

Cycle 2 will initiate a purge when Filter Cycle 2 is scheduled to

begin.

Restricting Operation

Th e control can be restricted to prevent unwanted use or

temperature adjustments. Locking the Panel prevents the

controller from being used, but all automatic functions are still

active. Locking the Settings allows Jets and other features to be

used, but the Set Temperature and other programmed settings

cannot be adjusted.

Adjusting Filtration

Filter Cycle 1

Using the same navigation and adjustment as Setting the Time, Filter Cycles are set using a start time and a duration. Each
setting can be adjusted in 15-minute increments. The panel calculates the end time and displays it automatically.

Filter Cycle 2

Simply navigate to the Filter Cycle 2 line by pressing the Right Navigation Button, and when “

Yes

” is highlighted, press

Up or Down to toggle Filter Cycle 2 on and off. When Filter Cycle 2 is ON, it can be adjusted in the same manner as Filter
Cycle 1 by navigating to the right.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten overall fi ltration by the overlap amount.

Purge Cycles

In order to maintain sanitary conditions, as well as protect against freezing, secondary water devices will purge water from
their respective plumbing by running briefl y at the beginning of each fi lter cycle.
If the Filter Cycle 1 duration is set for 24 hours, enabling Filter Cycle 2 will initiate a purge when Filter Cycle 2 is pro-
grammed to begin.

Filter Cycles

Back

Filter Cycle 1

Starts at 12:00 AM

Runs 0 HR 0 Min

Ends at 12:00 AM
Filter Cycle 2 NO

Starts at 12:00 AM

Runs 0 HR 0 Min

Ends at 12:00 AM

Filter Cycles

Back

Filter Cycle 1