10
Adjust the angle of the brush head
1. Hold the power tool in a firm grip.
2. Press the lock button to adjust the angle of the brush head.
Fig 4
3. Adjust the angle ofthe brush head to the required position. The brush head can be set in
five different positions (-36°, -18°, 0°, 18° i 36°).
4. Release the lock button and check that the brush head is properly locked.
Adjust the length of the telescopic handle
1. Unscrew the bottom part of the locking screw.
Fig 5.
2. Adjust the required handle length.
3. Tighten the locking screw.
Choose the right brush
The power tool is supplied with one steel brush and one nylon brush. The steel brush is
suitable for robust surfaces and stubborn weeds. The nylon brush is recommended for
vegetation and surfaces that are sensitive to the steel brush.
Note:
•
Always start by testing the power tool on a sample to see what effect the different
brushes have on different stone or paving surfaces. Do not use the power tool on
sensitive materials like bricks.
•
Only use brushes that are in good condition. Replace worn or damaged brushes
immediately.
Use
•
Always hold the powertool with both hands.
•
Move the powertool along the space between the flags.
•
For best results work at a steady pace.
•
Work the same place several times if necessary.