9
DESCRIPTION
1. Start inhibitor
2. Power switch
3. Battery holder
4. Guard
5. Brush
6. Adjusting the angle
7. Locking screw, telescopic adjustment
8. Angular adjustment, front handle
9. Front handle
Fig 1
ASSEMBLY
Fit the guard
Fasten the guard on the brush head with three screws.
Fig 2
Fit the brush
1. Press in the spindle lock.
Fig 3
2. Put the brush on the axle.
3. Fasten the brush with the wing nut.
4. Release the spindle lock.
USE
Intended use
This power tool is intended for removing weeds from between border stones and paving. It
is not intended for bricked surfaces. Only use the power tool for its intended purpose.
All other use is considered inappropriate and will invalidate the warranty.