Villager VTB 4310 V, Original User Manual

Page: 51 / 247

25
Villager VTB 4310 V (EN)
Troubleshooting
The engine does
not start 1. Ensure that the start/stop switch is in the correct
position.
2. Ensure that the spark plug is not defective.
3. Ensure that the spark plug cap is fitted correctly.
4. Ensure the fuel valve is open.
5. Ensure the choke is open.
6. Check the user manual for further guidance.
The engine runs
irregularly 1. Ensure that the choke is deactivated.
2. Ensure that there are no impurities in the petrol.
The blades do not
rotate 1. Ensure that there are no stones impeding the rotation of
the blades.
2. Ensure that the gas cable has not come loose.
3. Ensure that the gas cable can fully activate the engine.
4. Ensure that the belts are not damaged.
5. Ensure that the connection of belts is correctly.
The rotors keep
rotating after
friction clutching 1. Stop the engine. Contact your dealer for adjusting.
Engine Lacks Power
Possible Cause Correction
1. Check air filter.
Air filter clogged.
Clean or replace air
filter.
2. Check fuel. Bad fuel; tiller stored
without treating or
draining gasoline, or
refueled with bad
gasoline.
Drain fuel tank and
carburetor.
Refuel with fresh
gasoline .
3. Take tiller to an
authorized servicing
dealer, or refer to the
shop manual.
Fuel filter clogged,
carburetor malfunction,
ignition malfunction,
valves struck, ect.
Replace or repair faulty
components as
necessary.