18
Villager
Villager Villy 2020 E
(EN)
Due to the intelligent energy management system, the motor starts after a
delay.
After switching off the equipment, the blade continues to turn for
several seconds. Do not touch the moving blade. There is a risk of
injury.
Working with the device
Observe noise protection rules and other local regulations.
Regular mowing stimulates the grass to an increased leaf formation, while at the
same time killing weeds. Therefore, the lawn becomes denser after each mowing
process, resulting in an evenly loadable lawn.
The first cut takes place roughly in April when the grass is about 70 - 80 mm high.
During the main growing season, the lawn is mowed at least once a week.
•
Move the device at walking speed and in lines which should be as straight as
possible. For a flawless mowing result, the lines should always overlap by a few
centimetres.
•
Adjust the cutting height so that the device is not overloaded. If this not done,
the motor may become damaged.
•
Always move across slopes crosswise. Take special care when going backwards
and pulling the device.
•
Clean the device after each use, as described in the section "Cleaning/ storage
“.
After switching off the equipment, the blade continues to turn for
several seconds. Do not touch the moving blade. There is a risk of
injury.
Cleaning/maintenance
Have any work that is not described in these operating
instructions performed by an authorised customer service centre.
Only use original parts.
Wear gloves when handling the blade.