17
Villager
Villager Villy 2020 E
(EN)
Inserting/removing the rechargeable battery
Switch off the apparatus, remove the ignition key (
10) and wait for the
blades to come to a standstill.
1.
To remove the battery (9) from the device, press the release button (9a) on the
battery and pull the battery out.
2.
To insert the battery (9), push the battery along the guide rail into the device.
You will hear it click into place.
Switching on and off
The cordless lawnmower may only be used with Villager 18V batteries.
Never use non-reachable batteries.
•
Batteries can leak if they are not handled or used properly. Do not touch fluid
leaking from a battery.
•
If you get battery fluid on your skin, rinse immediately in plenty of fresh water.
If you get battery fluid in your eyes, rinse immediately with plenty of water and
seek medical attention. Leaking battery fluid can cause skin irritation or burn
injuries.
•
Never attempt to open the battery - risk of short circuiting.
1.
Place the apparatus on a level surface.
2.
Lift the cover (
8) on the device housing and insert the charged
batteries (9) along the guides into the device. You will hear them click into
place .
3.
Insert the ignition key (10) in the corresponding opening next to the
rechargeable battery (9). The ignition key can only be inserted in one
position. Take note of the guide groove on the opening next to the battery
and on the ignition key (10) (see small image
).
4.
Before switching the apparatus on, make sure that it is not touching any
objects.
5.
To switch the apparatus on, press the release button
(16) and hold it down while pressing the starting lever
(17). Let go of the release button.
6.
To switch the apparatus off, let go of the starting lever (17).