14
Villager
Villager Villy 2020 E
(EN)
Electrical Safety
•
The plug of the charger must fit into the socket. The plug must not be modified
in any way. Do not use any adapter plugs together with electric tools that have
a protective earth. Unmodified plugs and matching sockets reduce the risk of
electric shock.
•
Avoid body contact with earthed surfaces such as pipes, radiators, cookers and
refrigerators. There is an increased risk of electric shock if your body is earthed.
•
Do not expose electric tools to rain or wet conditions. The penetration of water
into an electric tool increases the risk of electric shock.
Attention! Observe the safety information in the operating
instructions for your rechargeable battery.
Assembly
•
Only carry out work that you know you are capable of.
•
If in doubt, consult an expert or our service centre directly.
Mounting the lower bar
1.
Fold the lower bar (3) upwards.
2.
Turn the lower tightening levers (5) clockwise to fasten.
3.
Lock the tightening levers (5) by pressing them in the direction of the lower bar
(3). The tightening levers must be pulled tight and then positioned against the
bar so that tightening can be carried out with medium force. If this fails,
continue to turn the tightening lever clockwise, or loosen it by turning counter
clockwise.
Mounting the upper bar
1.
Fasten the upper bar (1) with the enclosed screws (2b), the washers (2a) and
the upper tightening levers (2) on the right and left of the lower bar (3). The
release button (16) must be located on the right in the mowing direction. Two
positions are possible.
2.
Turn the tightening levers (2) clockwise to fasten.
3.
Lock the tightening levers (2) by pressing them in the direction of the bar (3).
The tightening levers must rest against the bar in such a way that tightening can
be carried out with medium force. If this fails, continue to turn the tightening
lever clockwise, or loosen it by turning counter clockwise (see small illustration).