13
Villager
Villager Villy 2020 E
(EN)
-
If a foreign object has been hit by the device. Check for damage to the
apparatus and carry out the necessary repairs before switching it on again
and working with it.
-
If the apparatus starts to vibrate excessively, an immediate check is
required.
-
Make sure that all nuts, bolts and screws are properly tightened.
-
Inspect the apparatus for any damage.
-
Have any necessary repairs carried out on damaged parts.
•
Do not bring your feet or hands into the vicinity of rotating parts (or beneath
them). Never stand in front of the grass ejector opening.
•
Always pull the circuit breaker/ ignition key if:
-
You leave the apparatus unattended, before clearing blockages.
-
If you are examining, cleaning or working on the apparatus.
-
After a collision with a foreign object. Immediately examine the device for
damage and, if necessary, have it repaired.
-
If the apparatus starts to vibrate in an unusual way (check immediately).
Maintenance and Storage
•
Give the motor time to cool off before you store the device in an enclosed
space.
•
Take care when using devices with several cutting tools since the movement of
one blade can lead to rotation of the other blades.
•
During maintenance of the cutting blades, be aware of the fact that even if the
power supply is switched off, the cutting blades can be set into motion.
•
Make sure that all nuts, bolts and screws are properly tightened, and that the
device is in safe working order.
•
Do not try to repair the device by yourself unless you have professional training.
All work not specified in these operating instructions may only be carried out by
customer service centres authorised by us.
•
Store the device in a dry place and out of reach of children.
•
Handle your device with care. Keep the tools sharpened and clean in order to
be able to work better and safer. Follow the maintenance instructions.
•
Wear safety gloves when replacing the cutting equipment.
•
Check the grass collection unit regularly for wear and tear and deformation.
Replace worn or damaged parts in the interests of safety. When setting up the
blades, take care that your fingers do not become caught between the rotating
blades and stationary parts of the machine.
•
Ensure that only replacement cutting tools approved by the manufacturer are
used.