5
Villager
VHW 100 – VHW 120 (EN)
WARNING:
To reduce the risk of electrocution, don’t start and run the machine in
the rain or storm. Keep all connections dry and off the ground. Do not touch plug
with wet hands. It is strictly prohibited to let water leak into the machine.
WARNING:
When the machine is turned on, the interior pumps start and continue
to run even if the pressure wand trigger has not been depressed. Running the
machine for more than 3 minutes without depressing the pressure wand trigger
could cause heat damage to the motor and pumps. Please do not leave the
machine running unattended.
WARNING:
When the machine is running, please maintain a constant water supply.
Without water circulation will damage the sealing rings of the machine.
WARNING:
It is necessary to turn on the spray lance within one or two minutes
after the machine has been started. Otherwise, the temperature of the circulating
water within the machine will soon rise to a critical point, which will cause damage
to the sealing rings inside the machine.
WARNING:
Don’t start and run the machine in a place excessively cold so as to
prevent the machine from the freezing current.
WARNING:
This machine has been designed for only using cleaning water, do not
use corrosive chemicals.
WARNING:
High-pressure jets can be dangerous if subject to
misuse. The jet must not be directed at persons, animals, live
electrical equipment or the machine itself. Pressure washers
should not be pointed at tire walls, as it may be possible to
damage them.
WARNING:
Do not direct the jet against yourself or others in order to clean clothes
or footwear.
WARNING:
Disconnect from the electrical power supply before carrying out user
maintenance. If the mains cable is damaged it must be replaced by the
manufacturer, or its service agent or similarly qualified person to avoid a hazard.
WARNING:
Do not use the machine if a supply cord or important parts are
damaged, e.g. safety devices, high pressure hoses, trigger gun.
WARNING:
Be aware of the recoil caused by the water jet when the machine is
switched on.
WARNING:
When the machine is moving and installing, the machine must be in
flat. When moving the machine, pulling the handle to move it.
Summary of Contents for VHW 100
Page 84: ......
