Villager VGS 260 PRIME, Manual

Page: 36 / 172

Villager VGS 260 PRIME (GB)
13
2. Symbols on the machine
For safe operation and maintenance, symbols are carved in relief
on the machine. According to these indications, please be careful
not to make a mistake.
a) The port to refuel the "MIX GASOLINE"
Position: Upper-front at the left side of the power unit (near the
fuel cap ).
b) The port to refuel the chain oil
Position: Lower-front at the left side of the power unit (near the
oil cap.
c) Flipping the switch to the "O" position, immediately the engine
stops.
Position: Front at the top of the rear handle (near the switch).
d) Starting the engine, if you pull out the choke knob (at the back-
right of the rear handle) to the point of the arrow, you can set
the starting mode as follows
• First-stage position – starting mode when the engine is warm.
• Second-stage position – starting mode when the engine is cool.
Position: Upper-right of the chain cover.
e) If you turn the rod by screwdriver follow the arrow to the "MAX"
position, the chain oil flow more, and if you turn to the "MIN"
position, less.
Position: Bottom of the power unit