Villager VGI 2400, Manual

Page: 60 / 297

28
Villager VGI 2400 (GB)
Storage and Transportation of the Generator
When transporting the generator, turn the 3 in 1 Start Switch (On / Off and Choke)
OFF. Keep the generator level to prevent fuel spillage. Fuel vapor or spilled fuel
may ignite.
•
Remove any debris that has collected on the generator and around the muffler
and control panel. Use a brush or vacuum to remove loose dirt.
•
Inspect air cooling slots. Remove any debris if obstructed.
•
For short-term storage, start the generator
once every 7 days.
•
For semi-long term storage, add fuel stabilizer
to prevent stale fuel from causing acid and gum
deposits in the fuel system
and carburetor
•
For long-term storage, drain the fuel.
•
Store indoors to prevent freezing and use a
protective cover to protect from dust.
•
The generator must be Shipped, Run, and
Stored in the upright position as seen in this
image.
Contact with a hot engine or exhaust system can cause
serious burns or fires. Let the engine cool before transporting
or storing the generator.
Take care not to drop or strike the generator when
transporting. Do not place heavy objects on the generator.
Engine Long Term Storage
•
Remove the spark plug and pour about 1 teaspoon of 10W30 Engine oil into the
spark plug hole. Reinstall the spark plug. With the 3 in 1 switch in the “OFF”
position pull the recoil starter cord several time to coat the cylinder walls with
oil.
•
Slowly pull the recoil starter until you feel the engine build compression (when
you feel resistance). Leave the engine in this state as this will prevent any
corrosion on the cylinder walls if stored for a long period of time.