Villager VGI 2400, Manual

Page: 48 / 297

16
Villager VGI 2400 (GB)
How to Stop Engine
•
Turn the Economy switch to the “OFF” position .
•
Disconnect any electronic device. All loads MUST be disconnect from the
generator. Never start or stop the engine with electrical devices plugged in to
the receptacles.
•
Turn the 3 in 1 Sta rt Switch to the “OFF” position .
•
Turn the fuel cap Air Vent to th e “OFF” position .
Never start or stop engine with electrical devices plugged
in to the receptacles. Failure to do so could damage the
generator and / or connected electrical devices.
•
Always start the engine and let it stabilize before connecting any electronic
devices.
•
Disconnect all electronic devices before stopping the engine.
How to Attach Electronic Devices
1. Before Starting generator
•
Make sure the generator is grounded (see earlier pages for instructions).
•
Make sure the attached load is within the generator rated output and the
receptacle’s rated current .
•
Make sure all electrical cords and receptacles are in good condition.
•
Make sure all electronic devices are turned “OFF” before plugging them into the
generator.
2. Start engine
3.
If the attached load is small, turn the Economy switch to the “ON” position. For a
larger load, or if attaching multiple electronic devices turn the Economy switch to
the “OFF” position .
4. Make sure the green AC pilot indicator light is on.
5. When engine has stabilized, plug in and turn on first load. It is strongly
recommended to plug in devices with the largest output first and the smallest
output last - to help prevent overloading the generator.