Villager VGI 2400, Manual

Page: 55 / 297

23
Villager VGI 2400 (GB)
Checking Spark Plug
•
Remove cap. Then remove spark plug cap.
•
Disconnect the spark plug wire from the spark
plug.
•
Before removing the spark plug, clean the area
around its base to prevent debris from entering
the engine.
•
Insert a spark plug socket wrench through the
opening on the outside of the cover. Turn the
wrench counterclockwise.
•
Check for discoloration and clean carbon deposits
off the electrode with a wire brush.
•
Check the electrode gap and slowly adjust to 0.7 -
0.8mm if necessary.
•
Reinstall spark plug and tighten to Torque 20.0
Nm.
•
If spark plug is worn replace only with an
equivalent replacement part. Spark plug should be
replaced annually.
•
Reconnect spark plug wire.
•
Replace spark plug cap, then replace cap.
After First 5 Hours Change Oil.
After 8 Hours or Daily Clean Debris.
Check Engine Oil Level.
6 Months (100 hr Use)
Check and Clean Air Filter Element. (Service more
often under wet or dusty conditions).
Change Engine Oil. (Service more often under
dirty or dusty conditions ).
Check Muffler Screen. Replace if necessary.
Service Spark Plug.
Inspect Muffler and Spark Arrester.
12 Months (300 hr Use) Clean Fuel Filter. Replace if necessary.
Check Crankcase Breather Hose for cracks or
damage. Replace if necessary.
De-carbonize cylinder head. See dealer.
Check and adjust Valve Clearance. See dealer.
Check all Fittings and Fasteners. See dealer.