USER'S MANUAL
Messages on display
(Rev. 7)
ENDOS AC/ACP - CE
59
•
Line voltage more than 12.1% of rated voltage
Before making an exposure the device checks the line voltage. If the
voltage is more than 12.1% compared with the rated voltage the
display shows the letters "HHH" together with the operativity green
LED which will start flashing. To reset this alert press any key
"increase" or "decrease".
•
Exposure time more than 4 seconds
In the start cycle phase (X-ray button pressed), the actual exposure
time is calculated according to the variation of line voltage. When the
time on the display is more than 4 seconds the time value will be
calculated (ES. 4.20 seconds) and simultaneously the green LED of
operational will flash. To reset this alert press any "increase" or
"decrease" key.
NOTE:
If the equipment suffers a Software crash, there is a safety timer in the
hardware that will cut off exposure after a maximum of 5.5 seconds.
Summary of Contents for ENDOS AC
Page 3: ...USER S MANUAL Revision history ENDOS AC ACP CE Rev 7 THIS PAGE IS INTENTIONALLY LEFT BLANK...
Page 34: ...USER S MANUAL Technical data Rev 7 ENDOS AC ACP CE 29 Heat storage kJ Curve tubehead cooling...
Page 75: ...USER S MANUAL Maintenance ENDOS AC ACP CE Rev 7 70 THIS PAGE IS INTENTIONALLY LEFT BLANK...
